English
- 中文
- English
- 日本語
SMS 防护服
The isolation gowns are made of PP+PE coating or SSMMS materials and can meet the requirements of EN 13795(Europe) or ANSI/AAMI PB70 Level 1-4(USA).
Eu Isolation Gowns
SFS 防护服
Us Isolation Gowns
刷手衣
隔离衣
口罩
SF Coveralls
Our protective clothing is made of SF laminated material, and the seam is sealed with heat-seal tape. The product features high antibacterial and anti-liquid penetration capacity, with excellent breathability and strength. The product complies with the Chinese standard requirements for disposable medical protective coverall (GB 19082-2009) and the European standard of protective clothing against liquid chemicals (spray-tight) (EN 14605:2005+A1:2009/TYPE 4), protective clothing against solid particles (EN ISO 13982-1:2004/A1:2010/ TYPE 5), protective clothing against liquid chemicals (EN 13034:2005+A1:2009/ TYPE 6), and protective clothing against infective agents (EN 14126:2003/AC:2004).
Medical Face Mask
The face mask is designed to be a three layers structure. The outside and inside layers are made by 100% raw PP spunbond nonwoven. The middle layer is meltblown which has excellent filtration performance. The facemask provides basic protection to particles and dust from the air, as well as protection against the spittle and secreta.
Our face mask products meet the requirement of multiple major medical standards, including the Chinese standards of YY/T 0969-2013 and YY0469-2011, European standard of EN14683:2019 Type II and Type IIR, as well as the American standard of ASTM F2100 Level 2 and Level 3. Our product can provide sufficient protection to medical and related personnel.
Medical Face Masks (Ear Loop)
|
Material |
PPSB + Melt-blown + PPSB |
||
|
Color |
White, L/Blue, L/Green, L/Yellow, L/Pink |
||
|
Sterile Status |
Packaging |
Unit/case |
Case Size |
|
Sterile |
Individually Packed, 30 pcs/box |
1500 |
52 x 44 x 45cm |
|
10 pcs/bag, 40 pcs/box |
2000 |
62 x 46 x 47.5cm |
|
|
Non-Sterile |
Individually Packed, 30 pcs/box |
1500 |
52 x 44 x 45cm |
|
50 pcs/box |
2500 |
52 x 44 x 45cm |
|
|
10 pcs/bag |
2000 |
52 x 44 x 45cm |
|
Medical Face Masks (Tie-on)
|
Material |
PPSB + Melt-blown + PPSB |
||
|
Color |
White, L/Blue, L/Green, L/Yellow, L/Pink |
||
|
Sterile Status |
Packaging |
Unit/case |
Case Size |
|
Sterile |
Individually Packed, 30 pcs/box |
1500 |
62 x 46 x 47.5cm |
|
10 pcs/bag, 40 pcs/box |
2000 |
62 x 46 x 47.5cm |
|
|
Non-Sterile |
30 pcs/bag/box |
1500 |
52 x 44 x 45cm |
|
50 pcs/bag/box |
2500 |
52 x 44 x 45cm |
|
Us Surgical Mask
Protective Face Mask
Our Protective Face Mask is made of spun-bond nonwoven and high filtration efficiency melt-blown material. There’re also two adjustable silicone beads to ensure the seal of the mask. This product meets the requirement of GB19083-2010 standard. It helps to filter particles in the air, block droplets, blood, body fluids and secreta in medical working environment.
|
Material |
PPSB + Melt-blown + PPSB |
||
|
Color |
White |
||
|
Sterile Status |
Packaging |
Unit/case |
Case Size |
|
Sterile |
Individually Packed, 30 paks/bow |
1200 |
68.2 x 48 x 46.5cm |
|
Non-Sterile |
2 pcs/bag |
2000 |
59 x 56 x 58cm |
|
5 pcs/bag |
2000 |
70 x 64 x 46cm |
|
Key requirements of GB 19083-2010
|
Requirement |
Our Products (VM-01-5B) |
|
|
NaCl Filtration Efficiency |
1级 ≥95% 2级 ≥99% 3级 ≥99.97% |
≥99.7% |
|
Airflow resistance |
No exceeding 343.2Pa |
Max 132.5 Pa |
|
Synthetic blood penetration |
No blood detected on the observed side |
Not Seen |
|
Air tightness |
Fit factor of the mask shall not be lower than 100 |
Pass |
Key requirements of EN 149:2001+A1:2009 FFP2N
|
Requirement |
Our Products (VM-01-5B) |
|
|
Filtration efficiency of Sodium chloride and paraffin oil |
FFP2 ≥94% |
≥98.5% |
|
Total Inward Leakage |
FFP2: 46/50 test results for TIL shall be not greater than 11%, arithmetic means for TIL shall be not greater than 8% |
Pass |
PARTICLE FILTERING HALF MASKS
This multi-layer respirator meets the requirements of GB 2626-2016 KN95 and EN 149:2001+A1:2009 FFP1NR，FFP2NR，FFP3NR. It is suitable for use in protection against the non-toxic solid and liquid aerosols, like in the environment of sanding soft wood, grinding, drilling of metal, etc.
|
Material |
PPSB + Melt-blown + ES + PPSB |
||
|
Color |
White |
||
|
Sterile Status |
Packaging |
Unit/case |
Case Size |
|
Non-Sterile |
5 pcs/bag |
1300 |
77 x 44 x 51.5cm |
|
Non-Sterile |
10 pcs/bag |
1500 |
77 x 34 x 51.5cm |
|
Individually packed, 30 pcs/ box |
600 |
60 x 38 x 30cm |
|
Disposable Hygiene Face Mask
The product is made of non-woven fabrics and melt-blown non-woven fabrics, which effectively block particles and dust in the air, and provide basic virus protection in daily life.
|
Material |
PPSB + Melt-blown + PPSB |
||
|
Color |
White, L/Blue, L/Green, L/Yellow, L/pink |
||
|
Size |
Packaging |
Unit/case |
Case Size |
|
S,12x7cm |
50 pcs/bag/box |
3600 |
52 x 44 x 45cm |
|
5/10 pcs/bag |
2000 |
52 x 44 x 52cm |
|
|
M,14.5x9.5cm |
50 pcs/bag/box |
2600 |
52 x 44 x 45cm |
|
5/10 pcs/bag |
2000 |
56 x 40 x 52cm |
|
|
L,17.5x9.5cm |
50 pcs/bag/box |
2000 |
52 x 44 x 45cm |
|
Individually Packed, 30 pcs/box |
2500 |
52 x 44 x 45cm |
|
|
10 pcs/bag |
2000 |
52 x 44 x 45cm |
|
